BQTVV - DUBL-CHEK PENETRANT, RC65 (SPRAY CAN)
- MSDS: BQTVV
- Manufacturer: SHERWIN INC
- Product Name: DUBL-CHEK PENETRANT, RC65 (SPRAY CAN)
- National Stock Number: 6850-00N037383
Product Identification
Product ID:DUBL-CHEK PENETRANT, RC65 (SPRAY CAN)
MSDS Date:06/01/1987
FSC:6850
NIIN:00N037383
MSDS Number: BQTVV
Responsible Party
SOUTH GATE, CA 90280
US
Emergency Phone: 213-861-6324;800-424-9300(CHEMTREC)
Info Phone: 213-861-6324
Cage: 21405
Contractor
Telephone: 562-861-6324/FAX 923-8370
Cage: 21405
Ingredients
USE AS HAMMER/OTHERWISE MISUSE. DO NOT USE IN
RTECS: 9999999ZZ
PREVENT VAPOR BUILDUP.
RTECS: 9999999ZZ
PETROLEUM GAS (LIQUEFIED); (HYDROCARBON PROPELLANT
CAS: 68476-85-7
RTECS: SE7545000
ACGIH TLV: 1000 PPM (MFR)
DIALKYLPATALATE OF C*9; (MIXED ESTERS, PHTHALATE)
CAS: 39393-37-8
TO TEMPS >120F MAY CAUSE BURSTING. AVOID PRLNG EXPOS
RTECS: 9999999ZZ
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES:IRRITATION. SKIN:MODERATE
IRRITATION. INHALATION:LIGHT HEADEDNESS.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NOT KNOWN.
First Aid
First Aid:EYES:FLUSH W/WATER FOR AT LEAST 15 MINUTES. SKIN:WASH &
REMOVE CONTAMINATED CLOTHING. INHAL:FRESH AIR. INGEST:DO NOT INDUCE
VOMITING. GET IMMEDIATE MEDICAL ATTENTION.
Fire Fighting
Lower Limits:1.8%
Upper Limits:9.5%
Extinguishing Media:CO*2, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
. SPRAY CANS UNDER PRESSURE - EXPLOSION HAZARD EXISTS. DO NOT ENTER
SPRAY CAN STOR AREA IF FIRE PRESENT.
Unusual Fire/Explosion Hazard:AS ENCOUNTERED W/PRESSURIZED SPRAY CANS,
USING FLAMM GAS AS PROPELLANT. CONSIDERED "EXTREMELY FLAMM". EXPLO
HAZ EXISTS WHEN SPRAY CANS HEATED.
Accidental Release
Spill Release Procedures:W/SPRAY CAN PACKAGE, SPILL OF CONSEQUENCE
UNLIKELY. ELIM ALL OPEN FLAMES & SOURCES OF IGNIT IN VICIN OF
SPILL/RELEASED VAP. VENT AREA. DO NOT ALLOW VAPS TO BUILDUP. ABSORB
SPILLS W/ABSORB MATL. (FIRE/ VAP HAZ MAY STILL EXIST AS ABSORB
MATLS(SUPDAT)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE SPRAY CANS IN COOL, WELL VENTED
AREAS AWAY FROM SOURCES OF IGNIT SUCH AS SPKS, TORCHES, OPEN
FLAMES, WELDING ARCS. DO NOT STORE >120F.
Other Precautions:CHECK W/LOC FIRE DEPT FOR STORING REQMTS. EMPTIED
CNTNRS RETAIN VAP & PROD RESIDUES. DO NOT WELD/CUT/DRILL CNTNR. DO
NOT PUNC, INCIN, CRUSH, COMPACT, BURN/HEAT. RETAINED VAP IS EXPLO.
DISP OF EMTPY SP RAY CANS PROPERLY. SPRAY CAN (SUPDAT)
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN . NOT NORMALLY REQUIRED. (VAPOR
CONCENTRATION FROM SPRAY CANS SUFFICIENT TO WARRANT RESPIRATORY
EQUIPMENT SHOULD NOT BE PER MITTED).
Ventilation:LOCAL EXHAUST SUFFICIENT TO KEEP VAPOR CONCENTRATION BELOW
TLV.
Protective Gloves:PLASTIC, RUBBER OR NEOPRENE GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE REQUIRED.
Work Hygienic Practices:WASH HANDS BEFORE EATING. DO NOT SMOKE.
Supplemental Safety and Health
VP:50 PSIG (IN CANS). SPILL PROC:WILL ABSORB ONLY LIQS, NOT VAPS).
PLACE CONTAM MATLS IN DISP CNTNRS. LEAKING SPRAY CANS SHLD BE
PLACED IN OPEN PAIL UNTIL PRESS DISSIPATED. OTHER PREC:PACKAGE
CONTAINS LIQUIFIED PETROL GAS (SIM PROPANE) WHICH IS EXTREMELY
FLAMM. CONTENTS OF SPRAY CAN ARE UNDER PRESS. EXPOS (ING 3)
Chemical Properties
Vapor Pres:SUPP DATA
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING MATERIALS.
Stability Condition to Avoid:OPEN FLAMES, BUILD UP OF VAPS, HIGH TEMPS.
HAZS NORMALLY ASSOC W/SPRAY CAN PACKAGES.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.
Disposal
Waste Disposal Methods:PLACE CONTAMINATED MATERIALS IN DISPOSABLE
CONTAINERS & DISPOSE OF I/A/W LOCAL, STATE & FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.